View TM104SBH04_7779953.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 1 of 23 model no. : TM104SBH04 issued date: 2010-9-7 version : ver 1.0 preliminary specification final product specification customer : approved by notes shanghai tianma confirmed : prepared by checked by approved by this technical specification is subjected to change without notice
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 2 of 23 table of contents table of contents .............................................................................................................. ..........................2 1 general specifications ......................................................................................................... ................4 2 input terminals pin assignment.............................................................................................4 3 absolute maximum ratings ......................................................................................................8 4 electrical characteristics....................................................................................................9 5 interface timing ............................................................................................................... ..........12 6 optical characteristics ........................................................................................................ ...............15 7 environmental / reliability tests.............................................................................................. ..........19 8 mechanical drawing ............................................................................................................. .............20 9 packaging drawing .............................................................................................................. ..............22 10 precautions for use of lcd modules ............................................................................................. ...23
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 3 of 23 record of revision rev issued date description editor 1.0 2010-9-7 new release kelly hu
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 4 of 23 1 general specifications feature spec size 10.4 inch resolution 800(rgb) x 600 interface lvds 8-bit/6-bit color depth 16.7m/262k technology type a-si pixel pitch (mm) 0.264x0.264 pixel configuration r.g.b. vertical stripe display mode tm with normally white surface treatment(up polarizer) anti-glare(3h) viewing direction 12 o?clock display spec. gray scale inversion direction 6 o?clock lcm (w x h x d) (mm) 243.00x179.40x10 active area(mm) 211.20x158.40 with /without tsp with tsp mechanical characteristics weight (g) tbd note 1: viewing direction for best image quality is different from tft definition. there is a 180 degree shift. note 2: requirements on environmental protection: q/s0002 note 3: lcm weight tolerance: 5% 2 input terminals pin assignment 2.1 tft lcd panel
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 5 of 23 cn1 connector type: 107a20-0021ra-g3-r no symbol i/o description comment 1 vdd p power supply 2 vdd p power supply 3 gnd p ground 4 dps i reverse scan function [h: enable; l/nc: disable] note3 5 rxin0- i 6 rxin0+ i lvds receiver signal channel 0. lvds differential data input (r0, r1, r2, r3, r4, r5, g0) note2 7 gnd p ground 8 rxin1- i 9 rxin1+ i lvds receiver signal channel 1. lvds differential data input (g1, g2, g3, g4, g5, b0, b1) note2 10 gnd p ground 11 rxin2- i 12 rxin2+ i lvds receiver signal channel 2 lvds differential data input (b2, b3, b4, b5, de) note2 13 gnd p ground 14 rxclkin- i 15 rxclkin+ i lvds receiver signal clock note2 16 gnd p ground 17 rxin3- i 18 rxin3+ i lvds receiver signal channel 3, nc for 6-bit lvds input. lvds differential data input (r6, r7, g6, g7, b6, b7, rsv) for 8-bit lvds input. note2 19 agmode i aging mode setting [h: aging mode; l/nc: normal] 20 sel68 p 6-bit/8-bit lvds data input selection [h: 8-bit l/nc: 6-bit] note2 p: power/gnd; i: input pin; table 2.1 input terminal pin assignment note1 : cn1 match connector type: df19g-20s-1c or compatible
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 6 of 23 note2: lvds 6-bit data mapping when sel68=l/nc as follows: figure 2.1.1 input signal data mapping lvds 8-bit data mapping when sel68=h as follows: figure 2.1.2 input signal data mapping note3 : dps: scan direction setting dps horizontal scan direction vertical scan direction high right to left down to up low/nc left to right up to down
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 7 of 23 2.2 cn2(backlight connector) connector type: 3808k-f05n-03r (entery) no symbol i/o description remark 1 vcc p power for led driving circuit.12.0v input. 2 pgnd p ground for led driving circuit. 0v input. 3 en i backlight enable setting. high: enabled; low: disable. 4 dimming i pwm signal for adjusting luminance of backlight. 5 nc - no connection match connector: h208k?p05n-02b (entery) 2.3 cn3(tsp interface) no symbol i/o description remark 1 y2 i ito film 2 x2 i ito glass 3 y1 i ito film 4 x1 i ito glass cn3(tsp fpc) match connector: sfw4r-1stae1 lf(for reference);
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 8 of 23 3 absolute maximum ratings gnd=0v, ta = 25 o c item symbol min max unit remark power voltage vdd -0.3 5.0 v power for led driving circuit vcc -0.3 13.5 v input voltage v in -0.3 5.0 v note1 input voltage for backlight v t -0.5 7.0 v note2 operating temperature t opr -20 70 storage temperature t stg -30 80 note1 : v in represents rxin0,rxin1,rxin2 ,rxin3,rxclkin,dps,agmode,sel68. note2 : v t represents en and dimming. table 3.1 absolute maximum rating
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 9 of 23 4 electrical characteristics 4.1 driving tft lcd panel gnd=0v, ta=25 item symbol min typ max unit remark supply voltage vdd 3.0 3.3 3.6 v lvds differential input high threshold v th - - +100 mv v cmlvds =1.2v lvds differential input low threshold v tl -100 - - mv v cmlvds =1.2v differential input voltage | v id | 0.1 - 0.6 v lvds input common mode voltage v cmlvds |v id |/2 - 1.4 -(|v id |/2) v common electrode driving signal vcom - 4.30 - v note1 sync frequency fvd - 60 70 hz vdd power consumption i vdd - 340 380 ma note2 figure 4.1.1 lvds dc timing diagram note1 : for different lcm, the value may have a bit of difference. note2 : to test the current dissipation, use ?all black pattern? test pattern.
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 10 of 23 4.2 driving backlight ta = 2 5 item symbol min typ max unit remark power for led driving circuit vcc 10.8 12.0 12.6 v current of backlight power i vcc - 0.32 - a 100% pwm duty backlight power consumption w bl - 3.84 - w 100% pwm duty dimming frequency f pwm 200 - 20k hz dimming duty cycle - 0 - 100% - high level input voltage v ih 2 - - v for dimming, en pin low level input voltage v il - - 0.8 v for dimming, en pin led life time - 25000 (50000) - hrs note 1 note1 : optical performance should be evaluated at ta=25 only. if led is driven by high current, high ambient temper ature & humidity condition, the life time of led will be reduced. operating life means brightness goes down to 50% initial brightness. typical operating life time is estimated data. series1 series2 series7 series8 leda ledk figure 4.2 led connection of backlight
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 11 of 23 4.3 block diagram r g b lvds interface pcb TM104SBH04 800x600(svga) source ic source ic gate ic leds dc/dc vgh, vee, rsds lvds cn1 led driving gamma buffer v1 ~ v14 t-con cn2 cn3 tsp interface
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 12 of 23 5 interface timing 5.1 timing parameter ta = 2 5 item symbol min typ max unit condition clock period tlvcp 20.0 25 31.25 ns clock high time tlvch - 14.29 - ns clock low time tlvcl - 10.71 - ns pll wake-up time tlvpll - - 1 ms input skew marign tlvskm 400 - - ps f=85mhz table 5.1 timing parameter sw: setup and hold time
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 13 of 23 figure 5.1 input signal data timing 5.2 power on/off sequence item symbol min typ max unit remark vdd 3.0v to signal starting tp1 5 - 50 ms signal starting to backlight on tp2 150 - - ms signal off to vdd 3.0v tp3 5 - 50 ms backlight off to signal off tp4 150 - - ms figure 5.2 interface power on/off sequence vdd signal backlight tp1 tp2 tp4 3.3v 0v t p 3
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 14 of 23 5.3 recommended input timing of lvds transmitter item parameter symbol min. typ. max. unit remarks dclk frequency 1/tclk 32 40 50 mhz horizontal total th 866 1056 1064 tclk horizontal blankin g thb 66 256 264 tclk horizontal section valid data width thd 800 800 800 tclk frame rate - - 60 70 hz vertical total tv 604 628 800 th vertical blankin g tvb 4 28 200 th vertical section valid data width tvd 600 600 600 th note: de signal is necessary. dclk data valid data thb tc l k de de thd th tv tvb tvd
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 15 of 23 6 optical characteristics item symbol condition min typ. max. unit remark t 60 70 - b 50 60 - l 60 70 - view angles r cr R 10 60 70 - degree note 2 contrast ratio cr =0 400 500 - note1,3 ton response time to ff 25 - 25 40 ms note1,4 x 0.2995 0.3005 0.3017 white y 0.3372 0.3381 0.3390 x 0.6128 0.6136 0.6152 red y 0.3537 0.3538 0.3538 x 0.3107 0.3114 0.3123 green y 0.5322 0.5335 0.5349 x 0.1313 0.1316 0.1321 chromaticity blue y - 0.1406 0.1415 0.1420 - note1,5 uniformity u - - 80 - % note1,6 ntsc - - - 47 - % note 5 luminance l - 220 260 - cd/m2 note1,7 test conditions: 1. vdd=3.3v, l i =20ma(backlight current), the ambient temperature is 25 . 2. the test systems refer to note 1 and note 2.
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 16 of 23 note 1 : definition of optical measurement system. the optical characteristics should be measured in dark room. after 5 minutes operation, the optical properties are measured at the center point of the lcd screen. all input terminals lcd panel must be ground when measuring the center area of the panel. note 2 : definition of viewi ng angle range and measurement system. viewing angle is measured at t he center point of the lcd by conoscope(ergo-80) fig. 1 definition of viewing angle item photo detector field contrast ratio luminance chromaticity lum uniformity sr-3a 1 response time bm-7a 2 500mm photo detector field lcd panel tft-lcd module the center of the screen
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 17 of 23 note 3 : definition of contrast ratio ?white state ?:the state is that the lcd is driven by v white. ?black state?: the state is that the lcd is driven by v black. v white: to be determined v black: to be determined. note 4: definition of response time the response time is defined as the lcd optical switching time interval between ?white? state and ?black? state. rise time (ton) is the time between photo detector output intensity changed from 90% to 10%. and fall time (toff) is the time between photo detector output intensity changed from 10% to 90%. note 5 : definition of color chromaticity (cie1931) color coordinates measured at center point of lcd. note 6 : definition of luminance uniformity active area is divided into 9 measuring areas (refer fig. 2). every measuring point is placed at the center of
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 18 of 23 each measuring area. luminance uniformity(u) = l min / l max l-------active area length w----- active area width fig. 2 definition of uniformity l max: the measured maximum luminance of all measurement position. l min: the measured minimum luminance of all measurement position. note 7 : definition of luminance : measure the luminance of white state at center point
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 19 of 23 7 environmental / reliability tests no test item condition remark 1 high temperature operation ts = + 7 0 , 240hrs note1 iec60068-2-1,gb2423.2 2 low temperature operation ta = - 2 0 , 240hrs iec60068-2-1 gb2423.1 3 high temperature storage (non-operation) ta = + 8 0 , 240hrs iec60068-2-1 gb2423.2 4 low temperature storage (non-operation) ta = - 3 0 , 240hrs iec60068-2-1 gb2423.1 5 high temperature & high humidity opera- tion ta = +60 , 90% rh max,240 hours note2 iec60068-2-78 gb/t2423.3 6 thermal shock (non-operation) -30 30 min~+80 30 min, change time:5min, 30 cycles start with cold temperature, end with high temperature, iec60068-2-14:1984,gb2423.22 7 electro static discharge (operation) c=150pf,r=330 ? , air:15kv, contact:8kv, 10times/terminal iec61000-4-2 gb/t17626.2 8 vibration (non-operation) frequency range:10 55hz, stroke:1.5mm sweep:10hz 55hz 10hz 2hours for each direction of x.y.z (6 hours for total) iec60068-2-6 gb/t2423.10 9 shock (non-operation) 80g 6ms, x,y,z 3 times for each direction iec60068-2-27 gb/t2423.5 10 package drop test height:80 cm,1 corner, 3 edges, 6 surfaces iec60068-2-32 gb/t2423.8 11 package vibration test random vibration: 0.015gxg/hz for 5-200hz, -6db/octave from 200-500hz 2 hours for each direction of x,y,z (6 hours for total) iec60068-2-34 gb/t2423.11 note1: ts is the temperature of panel?s surface. note2: ta is the ambient temperature of sample.
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 20 of 23 8 mechanical drawing
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 21 of 23 w= p1.0x(4-1)=3.00? .10
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 22 of 23 9 packaging drawing n o item model (material) dimen- sions(mm) unit weight(kg) quantity remark 1 lcm module TM104SBH04 243x179.4x10 tbd 20 2 partition_1 corrugated paper 513x333x217 tbd 1 3 anti-static bag pe 265x255x0.05 0.0054 20 4 dust-proof bag pe 700x530 tbd 1 5 partition_2 corrugated paper 505x332 0.1 1 6 corrugated bar corrugated paper 413x285 tbd 1 7 carton corrugated paper 530x350x250 1.12 1 8 total weight tbd ? ? ?| ?^ c8 88? ] 201201 ? ? ?| ?^ c8 88? ] 201201 ? ? ?| ?^ c8 88? ] 201201 ? ? ?| ?^ c8 88? ] 201201 ? ? ?| ?^ c88 8? ] 2 01201 ? ? ?| ?^ c88 8? ] 2 01201 ? ? ?| ?^ c88 8? ] 2 01201 ? ? ?| ?^ c88 8? ] 2 01201 epe partition _2 dust_proof_bag corrugated bar b lu label module label bl u la bel modu le l abe l
shanghai tianma micro-electronics TM104SBH04 v1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page: 23 of 23 10 precautions for use of lcd modules 10.1 handling precautions 10.1.1. the display panel is made of glass. do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2. if the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes,promptly wash it off using soap and water. 10.1.3. do not apply excessive force to the display su rface or the adjoining areas since this may cause the color tone to vary. 10.1.4. the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully. 10.1.5. if the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. if still not completely clear, moisten cloth with one of the following solvents: ? isopropyl alcohol ? ethyl alcohol solvents other than those mentioned above may damage the polarizer. especially, do not use the following:? water, ketone, aromatic solvents 10.1.6. do not attempt to disassemble the lcd module. 10.1.7. if the logic circuit power is off, do not apply the input signals. 10.1.8. to prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. a. be sure to ground the body when handling the lcd modules. b. tools required for assembly, such as soldering irons, must be properly ground. c. to reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. d. the lcd module is coated with a film to protect the display surface. be care when peeling off this protective film since static electricity may be generated. 10.2 storage precautions 10.2.1. when storing the lcd modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 10.2.2. the lcd modules should be stored under the storage temperature range. if the lcd modules will be stored for a long time, the recommend condition is: temperature : 0 40 relatively humidity: 80% 10.2.3. the lcd modules should be stored in the room without acid, alkali and harmful gas. 10.3 transportation precautions the lcd modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine.

▲Up To Search▲

Price & Availability of TM104SBH04

	To Download TM104SBH04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .